Vertical seals
Magnetic strips
Magnetic strips are used for vertical sealing of shower enclosure and holding the doors in position additionally. All strips are available for shower enclosures with a glass thickness of 6mm or 8mm in different designs. This applies to 4-corner, 5-corner as well as round shower enclosures. The sealings can be ordered either directly in the appropriate length, or alternatively, in a cost-effective universal length. You can shorten these to the correct length using simple means, e.g. rose shears, cutter or pocket hack saw.
Tip: Replace calcified or discolored sealings easily. Simply pull them off and attach the new magnetic strip after carefully cleaning the glass.
Sealing strips / O strips
O-strips and sealing strips close off shower enclosures vertically and are used between glass and wall profile or between two glass segments. All strips are available in different versions for shower enclosures with a glass thickness of 6mm or 8mm. The sealings can be ordered either directly in the appropriate length, or alternatively, in a cost-effective universal length. You can shorten these to the correct length using simple means, e.g. rose shears, cutter or pocket hack saw.
Tip: Replace calcified or discolored sealings easily. Simply pull off the sealing and fit the new strip after carefully cleaning the glass. Done.
Terminal strips
With its fir-shaped design, the clamping strip is pressed between the glass and the wall strip, stabilizing the glass and holding it into position. Clamping strips can be ordered either directly in the appropriate length, or alternatively, in a cost-effective universal length. You can shorten these to the correct length using simple means, e.g. rose shears, cutter or pocket hack saw.
Tip: Clamping strips can also get discolored and porous over time. It is possible to replace them without any problems. Carefully pull the old clamping strip out of the profile, remove any residue from the glass and press in the new clamping strip.